Zhejiang Fengfeng Pipe Industy's HDPE Electrofusion Equal Coupler with a smooth surface, SDR7.4, and PN25 is a specific type of electrofusion fitting used in high-pressure pipeline systems, typically in water, gas, and industrial applications.
Technical Characteristics
SDR7.4:
SDR (Standard Dimension Ratio) refers to the ratio of the pipe diameter to the wall thickness. In this case, SDR7.4 indicates that the pipe has a thinner wall compared to higher SDR ratings (such as SDR11 or SDR17), which are designed for higher pressure applications.
The SDR7.4 rating typically indicates the fitting is designed for higher-pressure systems and is commonly used for pipelines that carry liquids or gases under significant pressure.
Applications:
lay underground gas and water system
vacuum and waste-water disposal system
chemical industry system
wastewater treatment system
waste incineration system
the building of swimming pool system
Specifications
Electrofusion vs Butt Fusion: The Verdict Before the Detail Electrofusion wins when the pipe cannot move, when the trench is tight, when the diameter sits between 20 mm and 250 mm, or when the joint ...
READ MOREThe Leak Starts Before the Wrench Turns A leaking HDPE compression fitting is usually not a failed fitting. It is a failed interface between the pipe, the seal, the nut, and the installer's hand. The...
READ MOREThe Short Answer: Match SDR to the Pipe, Then Check PN If you are extending, repairing, or specifying an HDPE line, the fitting SDR should match the pipe SDR. A PE100 SDR 11 fitting belongs on PE100 ...
READ MOREKEEP IN TOUCH