HDPE Socket Fusion Equal Tee is a pipe connector commonly used in construction, water supply and drainage, gas and other fields. It has a simple structure, easy installation, sealing performance and strong corrosion resistance.
Technical Characteristics
HDPE Socket Fusion Equal Tee is made of high-density polyethylene (HDPE) material with better corrosion resistance. It can maintain stable chemical properties in acidic and alkaline environments and will not be damaged by corrosion. In pipe connections in water supply, drainage, gas and other fields, HDPE Socket Fusion Equal Tee can effectively prevent pipes from rusting, aging and other problems.
HDPE Socket Fusion Equal Tee uses hot melt welding technology to make the connection between the socket and tee very tight, with almost no leakage. In addition, the socket part is also equipped with a sealing ring, which further enhances the sealing performance of the connection. During use, users can rest assured that no water leakage will occur.
Specifications
| SPECIFICATION | |
| 20 | 75 |
| 25 | 90 |
| 32 | 110 |
| 40 | |
| 50 | |
| 63 | |
Electrofusion vs Butt Fusion: The Verdict Before the Detail Electrofusion wins when the pipe cannot move, when the trench is tight, when the diameter sits between 20 mm and 250 mm, or when the joint ...
READ MOREThe Leak Starts Before the Wrench Turns A leaking HDPE compression fitting is usually not a failed fitting. It is a failed interface between the pipe, the seal, the nut, and the installer's hand. The...
READ MOREThe Short Answer: Match SDR to the Pipe, Then Check PN If you are extending, repairing, or specifying an HDPE line, the fitting SDR should match the pipe SDR. A PE100 SDR 11 fitting belongs on PE100 ...
READ MOREKEEP IN TOUCH